Specifications

show ip rsvp high-availability database
MP-535
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
Table 62 describes the significant fields shown in the display.
Ta b l e 62 show ip rsvp high-availability database lsp-head—Active RP Field Descriptions
Field Description
LSP_HEAD WRITE DB Storage area for active RP LSP-head data. This field is blank
on a st
andby RP.
Tun ID Tunnel identifier.
Header Header information.
State Status of an entry. Values are as follows:
• Ack-Pending—Entries have been sent, but not
acknowledged.
• Checkpointed—Entries have been sent and
acknowledged by the standby RP.
• Send-Pending—Entries are waiting to be sent.
Action Action taken. Values are as follows:
• Add—Adding an item to the standby RP.
• Delete—Deleting an item from the standby RP. This
action appears temporarily while the active RP awaits an
ack of the delete operation.
• Modify—Modifying an item on the standby RP.
• Remove—Removing an item from the standby RP.
Seq # Numbers used by the active and standby RPs to synchronize
me
ssage acks and nacks to messages sent.
Flags Attribute used to identify or track data.
Data Information.
lsp_id LSP identifier.
bandwidth Bandwidth on the LSP (in kilobits per second).
thead_flags Tunnel head attribute used to identify or track data.
popt Parsing option number.
feature_flags Indicates whether the LSP being used to forward traffic is the
sec
ondary LSP using the path protection path-option. Valid
values are as follows:
• none
• path protection active
output_if_num Output interface number.
output_nhop Output next hop IP address.
RRR path setup info Routing with Resource Reservation (RRR) path information.
Destination Destination IP address.