Specifications

show ip rsvp high-availability database
MP-536
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
The fields for a standby RP are the same as those described in Table 62 except they are now in the
LSP_head read database instead of the LSP_head write database that is used by an active RP.
Summary Example on an Active RP
The following is sample output from the show ip rsvp high-availability database summary command
on an active RP:
Router# show ip rsvp high-availability database summary
Write DB:
Send-Pending: 0
Ack-Pending : 0
Checkpointed: 10
Total : 10
Read DB:
Total : 0
Table 63 describes the significant fields shown in the display.
Id IP address and protocol of the routing node. Values are the
f
ollowing:
• isis = Intermediate System-to-Intermediate System
• ospf = Open Shortest Path First
flag Attribute used to track data.
IGP Interior Gateway Protocol. ospf = Open Shortest Path First.
IGP area IGP area identifier.
Number of hops Number of connections or routers.
metric Routing cost.
Hop Hop’s number and IP address.
Id IP address and protocol of the routing node. Values are the
f
ollowing:
• isis = Intermediate System-to-Intermediate System
• ospf = Open Shortest Path First
flag Attribute used to track data.
LSP_HEAD READ DB Storage area for standby RP LSP-head data. This field is
bl
ank on an active RP.
Table 62 show ip rsvp high-availability database lsp-head—Active RP Field Descriptions
Field Description
Ta b l e 63 show ip rsvp high-availability database summary—Active RP Field Descriptions
Field Description
Write DB Storage area for active RP summary data. This field is blank
on a st
andby RP.
Send-Pending Entries are waiting to be sent.