Specifications

show ip rsvp host
MP-540
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
Related Commands
I/F Interface of the previous hop.
BPS Reservation rate in bits per second (bps).
Mode(s) Any of the following strings:
• Host—The router is acting as the host system or RSVP
endpoint for this reservation.
• LSP-Tunnel—The reservation is for a Traffic Engineering
(TE) tunnel.
• MIB—The reservation was created via an SNMP SET
directive from a remote management station.
• CLI—The reservation was created via a local RSVP CLI
command.
• Host CLI—A combination of the host and CLI strings
meaning that the static sender being displayed was created
by the ip rsvp sender-host CLI command.
Identity The alias string for the RSVP application ID.
Locator The application ID that is being signaled in the RSVP PATH
m
essage for this statically-configured sender.
ID Type Types of identities. RSVP defines two types: application IDs
(Applic
ation) and user IDs (User). Cisco IOS software
currently supports Application only.
Table 66 show ip rsvp host senders (RSVP Identity Configured) Field Descriptions (continued)
Field Description
Command Description
ip rsvp sender-host Enables a router to simulate a host generating an RSVP PATH message.