Specifications

show ip rsvp interface detail
MP-542
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
Refresh Interval: FRR: 200 , Reroute: 2000
Missed Acks: FRR: 4 , Reroute: 4
DSCP in HELLOs: FRR: 0x30 , Reroute: 0x30
Table 67 describes the significant fields shown in the display.
Related Commands
Ta b l e 67 show ip rsvp interface detail Field Descriptions
Field Description
RSVP Status of the Resource Reservation Protocol
(RSV
P) protocol (Enabled or Disabled).
Interface State Status of the interface (Up or Down).
Curr allocated Amount of bandwidth (in bits per second [bps])
c
urrently allocated.
Max. allowed (total) Total maximum amount of bandwidth (in bps)
a
llowed.
Max. allowed (per flow) Maximum amount of bandwidth (in bps) allowed
p
er flow.
Max. allowed for LSP tunnels using sub-pools Maximum amount of bandwidth permitted for
l
abel-switched path (LSP) tunnels that obtain
their bandwidth from subpools.
DSCP value used in RSVP msgs The differentiated services code point (DSCP)
v
alue that is in RSVP messages.
BFD Extension State State (Enabled or Disabled) of BFD extension.
RSVP Hello Extension State State (Enabled or Disabled) of Hello extension.
Missed Acks Number of sequential acknowledgments that the
node
did not receive.
DSCP in HELLOs The DSCP value that is in hello messages.
Command Description
ip rsvp signalling hello (interface) Enables Hello on an interface where you need Fast
Re
route protection.
ip rsvp signalling hello dscp Sets the DSCP value that is in the IP header of the hello
m
essage sent out from an interface.
ip rsvp signalling hello refresh interval Configures the Hello request interval.