Specifications

show ip traffic-engineering configuration
MP-547
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
Table 69 describes the significant fields shown in the display.
Related Commands
Ta b l e 69 show ip traffic-engineering configuration detail Field Descriptions
Field Description
Filter The configured filter identifier for the traffic engineering route.
egress The prefix/mask configured with the filter local metric.
local metric The routing protocol and metric value of the local LSR for the
e
gress prefix/mask.
Tunnel5 The tunnel for the traffic engineering route.
route installed/not installed Indicates whether the route is installed in the forwarding tables
(t
ypically CEF and label interface up/down).
interface Indicates whether the tunnel interface for the traffic engineering
r
oute is up or down. The traffic engineering route is not installed
if the tunnel interface is down.
preference The configured administrative preference for the traffic
eng
ineering route.
loop check Indicates whether the loop check has been configured on or off.
passing/failing If the loop check is configured on, indicates whether the check is
pas
sing. The traffic engineering route is not installed if the loop
check is configured on and is failing.
remote metric The routing protocol and the metric within that protocol for the
p
refix in question, as seen by the LSR that is advertising the
metric. As part of the loop check, a comparison is made between
the remote metric and the local metric.
Command Description
show ip traffic-engineering routes Displays information about the requested filters configured
f
or traffic engineering.