Specifications

show ip vrf
MP-551
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
Usage Guidelines Use this command to display information about VRFs. Two levels of detail are available:
• The brief keyword (or no keyword) displays concise information.
• The detail keyword displays all information.
To display information about all interfaces bound to a particular VRF, or to any VRF, use the i
nterfaces
keyword. To display information about VPN IDs assigned to a PE router, use the id keyword.
Examples The following example displays information about all the VRFs configured on the router, including the
d
ownstream VRF for each associated VAI. The lines that are highlighted (for documentation purposes
only) indicate the downstream VRF.
Router# show ip vrf
Name Default RD Interface
D 2:0 Loopback2
Virtual-Access3 [D]
Virtual-Access4 [D]
U 2:1 Virtual-Access3
Virtual-Access4
Table 71 describes the significant fields shown in the display.
The following example displays detailed information about all of the VRFs configured on the router,
in
cluding all of the VAIs associated with each VRF:
Router# show ip vrf detail
VRF D; default RD 2:0; default VPNID <not set>
Interfaces:
Loopback2 Virtual-Access3 [D] Virtual-Access4 [D]
Connected addresses are not in global routing table
Export VPN route-target communities
RT:2:0
Import VPN route-target communities
RT:2:1
No import route-map
No export route-map
VRF U; default RD 2:1; default VPNID <not set>
Interfaces:
Virtual-Access3 Virtual-Access4
Connected addresses are not in global routing table
No Export VPN route-target communities
Import VPN route-target communities
RT:2:1
No import route-map
No export route-map
Ta b l e 71 show ip vrf Field Descriptions
Field Description
Name Specifies the VRF name.
Default RD Specifies the default route distinguisher.
Interface Specifies the network interface.