Specifications

show isis database verbose
MP-554
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show isis database verbose
To display additional information about the Intermediate System-to-Intermediate System (IS-IS)
database, use the show isis database verbose command in user EXEC or privileged EXEC mode.
show isis database verbose
Syntax Description This command has no arguments or keywords.
Command Modes User EXEC
Privileged EXEC
Command History
Examples The following is sample output from the sho
w isis database verbose command:
Router# show isis database verbose
IS-IS Level-1 Link State Database
LSPID LSP Seq Num LSP Checksum LSP Holdtime ATT/P/OL
dtp-5.00-00 * 0x000000E6 0xC9BB 1042 0/0/0
Area Address:49.0001
NLPID: 0xCC
Hostname:dtp-5
Router ID: 10.5.5.5
IP Address: 172.16.39.5
Metric:10 IP 172.16.39.0/24
dtp-5.00-01 * 0x000000E7 0xAB36 1065 0/0/0
Metric:10 IS-Extended dtp-5.01
Affinity:0x00000000
Interface IP Address:172.21.39.5
Physical BW:10000000 bits/sec
Reservable BW:1166000 bits/sec
BW Unreserved[0]: 1166000 bits/sec, BW Unreserved[1]: 1166000 bits/sec
BW Unreserved[2]: 1166000 bits/sec, BW Unreserved[3]: 1166000 bits/sec
BW Unreserved[4]: 1166000 bits/sec, BW Unreserved[5]: 1166000 bits/sec
BW Unreserved[6]: 1166000 bits/sec, BW Unreserved[7]: 1153000 bits/sec
Metric:0 ES dtp-5
Release Modification
12.0(5)S This command was introduced.
12.1(3)T This command was integrated into Cisco IOS Release 12.1(3)T.
12.0(10)ST This command was integrated into Cisco IOS Release 12.0(10)ST.
12.2(27)SBC This command was integrated into Cisco IOS Release 12.2(27)SBC.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
i
n a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.