Specifications

show isis mpls traffic-eng adjacency-log
MP-559
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show isis mpls traffic-eng adjacency-log
To display a log of 20 entries of Multiprotocol Label Switching (MPLS) traffic engineering Intermediate
System-to-Intermediate System (IS-IS) adjacency changes, use the show isis mpls traffic-eng
adjacency-log command in user EXEC or privileged EXEC mode.
show isis mpls traffic-eng adjacency-log
Syntax Description This command has no arguments or keywords.
Command Modes User EXEC
Privileged EXEC
Command History
Examples The following is sample output from the s
how isis mpls traffic-eng adjacency-log command:
Router# show isis mpls traffic-eng adjacency-log
IS-IS RRR log
When Neighbor ID IP Address Interface Status Level
04:52:52 0000.0024.0004.02 0.0.0.0 Et0/2 Up level-1
04:52:50 0000.0026.0001.00 172.16.1.2 PO1/0/0 Up level-1
04:52:37 0000.0024.0004.02 10.0.0.0 Et0/2 Up level-1
Table 77 describes the significant fields shown in the display.
Release Modification
12.0(5)S This command was introduced.
12.1(3)T This command was integrated into Cisco IOS Release 12.1(3)T.
12.0(10)ST This command was integrated into Cisco IOS Release 12.0(10)ST.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
i
n a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.
Ta b l e 77 show isis mpls traffic-eng adjacency-log Field Descriptions
Field Description
When Amount of time since the entry was recorded in the log.
Neighbor ID Identification value of the neighbor.
IP Address Neighbor IPv4 address.
Interface Interface from which a neighbor is learned.
Status Up (active) or Down (disconnected).
Level Routing level.