Specifications

show isis mpls traffic-eng advertisements
MP-561
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show isis mpls traffic-eng advertisements
To display the last flooded record from Multiprotocol Label Switching (MPLS) traffic engineering, use
the show isis mpls traffic-eng advertisements command in user EXEC or privileged EXEC mode.
show isis mpls traffic-eng advertisements
Syntax Description This command has no arguments or keywords.
Command Modes User EXEC
Privileged EXEC
Command History
Examples The following is sample output from the sho
w isis mpls traffic-eng advertisements command:
Router# show isis mpls traffic-eng advertisements
System ID:dtp-5.00
Router ID:10.5.5.5
Link Count:1
Link[1]
Neighbor System ID:dtp-5.01 (broadcast link)
Interface IP address:172.21.39.5
Neighbor IP Address:0.0.0.0
Admin. Weight:10
Physical BW:10000000 bits/sec
Reservable BW:1166000 bits/sec
BW unreserved[0]:1166000 bits/sec, BW unreserved[1]:1166000 bits/sec
BW unreserved[2]:1166000 bits/sec, BW unreserved[3]:1166000 bits/sec
BW unreserved[
4]:1166000 bits/sec, BW unreserved[5]:1166000 bits/sec
BW unreserved[6]:1166000 bits/sec, BW unreserved[7]:1153000 bits/sec
Affinity Bits:0x00000000
Release Modification
12.0(5)S This command was introduced.
12.1(3)T This command was integrated into Cisco IOS Release 12.1(3)T.
12.0(10)ST This command was integrated into Cisco IOS Release 12.0(10)ST.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
i
n a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.