Specifications

show issu entities
MP-568
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show issu entities
To display information about entities within one or more In Service Software Upgrade (ISSU) clients,
use the show issu entities command in user EXEC or privileged EXEC mode.
show issu entities [cl
ient_id]
Note An entity is a logical group of sessions that possess some common attributes.
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
Usage Guidelines Enter a Client_ID if you are interested in seeing information only about one client’s entities. If a
Clie
nt_ID is not specified, the command will display all ISSU clients’ entities known to the device.
If you are not sure of the precise Client_ID number to enter for the client you are interested in, use the
sho
w issu clients command to display the current list of clients with their names and ID numbers.
Examples The following example shows detailed information about the entities within the virtual routing and
fo
rwarding (VRF) (“Table ID”) client:
Router# show issu entities 2008
Client_ID = 2008 :
Entity_ID = 1, Entity_Name = Tableid Entity :
MsgType MsgGroup CapType CapEntry CapGroup
Count Count Count count Count
2 2 1 2 2
client_id (Optional) The identification number of a single ISSU client.
Release Modification
12.2(28)SB This command was introduced.
12.2(33)SRB1 ISSU is supported on the Cisco 7600 series routers in Cisco IOS
Re
lease 12.2(33)SRB.
Ta b l e 81 show issu entities Field Descriptions
Field Description
Client_ID The identification number used by ISSU for the specified client.
Entity_ID The identification number used by ISSU for each entity within this
c
lient.
Entity_Name A character string describing the entity.