Specifications

show issu message types
MP-570
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show issu message types
To display formats (“types”), versions, and maximum packet size of the In Service Software Upgrade
(ISSU) messages supported by a particular client, use the show issu message types command in user
EXEC or privileged EXEC mode.
show issu message types c
lient-id
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
Usage Guidelines If you are not sure of the Client_ID number to enter into this command, use the sho
w issu clients
command. It displays the current list of clients, along with their names and ID numbers.
Examples The following example displays the message type, version, and maximum message size supported by the
Mu
ltiprotocol Label Switching (MPLS) Virtual Private Network (VPN) client:
Router# show issu message types 2009
Client_ID = 2009, Entity_ID = 1 :
Message_Type = 1, Version_Range = 1 ~ 1
Message_Ver = 1, Message_Mtu = 32
Table 82 describes the significant fields shown in the display.
client-id The identification number used by ISSU for a client application.
Release Modification
12.2(28)SB This command was introduced.
12.2(33)SRB1 ISSU is supported on the Cisco 7600 series routers in Cisco IOS
Re
lease 12.2(33)SRB.
Ta b l e 82 show issu message types Field Descriptions
Field Description
Client_ID The identification number used by ISSU for this client.
Entity_ID The identification number used by ISSU for this entity.
Message_Type An identification number that uniquely identifies the format used in
th
e ISSU messages conveyed between the two endpoints.
Version_Range The lowest and highest message-version numbers contained in the
c
lient application.