Specifications

show issu negotiated
MP-572
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show issu negotiated
To display details of the session’s negotiation about message version or client capabilities, use the
show issu negotiated c
ommand in user EXEC or privileged EXEC mode.
show issu negotiated {v
ersion | capability} session-id
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
Usage Guidelines If you are not sure of the session_ID number to enter into this command, enter the show
issu sessions
command. It will display the session_ID.
Examples The following example displays the results of a negotiation about message versions:
router# show issu negotiated version 39
Session_ID = 39 :
Message_Type = 1, Negotiated_Version = 1, Message_MTU = 32
Table 83 describes the significant fields shown in the display.
version Displays results of a negotiation about versions of the messages exchanged
du
ring the specified session, between the active and standby endpoints.
capability Displays results of a negotiation about the client application’s capabilities
f
or the specified session.
session-id The number used by In Service Software Upgrade (ISSU) to identify a
p
articular communication session between the active and the standby
devices.
Release Modification
12.2(28)SB This command was introduced.
12.2(33)SRB1 ISSU is supported on the Cisco 7600 series routers in Cisco IOS
Re
lease 12.2(33)SRB.
Ta b l e 83 show issu negotiated version Field Descriptions
Field Description
Session_ID The identification number of the session being reported on.
Message_Type An identification number that uniquely identifies the format that was
use
d by the ISSU messages conveyed between the two endpoints.