Specifications

show mpls atm-ldp bindings
MP-577
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show mpls atm-ldp bindings
Note Effective with Cisco IOS Release 12.4(20)T, the show mpls atm-ldp bindings command is not available
in Cisco IOS software.
To display specified entries from the ATM label binding database, use the sho
w mpls atm-ldp bindings
command in privileged EXEC mode.
show mpls atm-ldp bindings [ne
twork {mask | length}] [local-label vpi vci] [remote-label vpi vci]
[neighbor interface]
Syntax Description
Command Default The entire ATM label binding database is displayed if no optional arguments or keywords are specified.
Note To display information about entries in the label binding database for interfaces other than ATM
interfaces, use the show mpls ip binding command.
Command Modes Privileged EXEC (#)
Command History
network (Optional) Defines the destination network number.
mask (Optional) Defines the network mask in the form A.B.C.D (destination
pre
fix).
length (Optional) Defines the mask length (1 to 32).
local-label vp
i vci (Optional) Selects the label values assigned by this router. The virtual path
identifier (VPI) range is 0 to 4095. The virtual channel identifier (VCI)
ra
nge is 0 to 65535.
remote-label vp
i vci (Optional) Selects the label values assigned by the other router. VPI range is
0 to 4095. VCI range is 0 to 65535.
neighbor in
terface (Optional) Selects the label values assigned by the neighbor on a specified
interface.
Release Modification
11.1CT This command was introduced.
12.0(10)ST This command was modified to use Multiprotocol Label Switching (MPLS)
In
ternet Engineering Task Force (IETF) command syntax and terminology.
12.0(14)ST This command was integrated into Cisco IOS Release 12.0(14)ST.
12.1(2)T This command was integrated into Cisco IOS Release 12.1(2)T.
12.1(8a)E This command was integrated into Cisco IOS Release 12.1(8a)E.
12.2(2)T This command was integrated into Cisco IOS Release 12.2(2)T.
12.2(4)T The VPI range of values for this command was extended to 4095.
12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T.