Specifications

show mpls atm-ldp bindings
MP-578
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
Usage Guidelines The ATM label binding database contains entries for label virtual circuits (VCs) on label-controlled
(LC)-ATM interfaces. Command output can show a summary of entries from the entire database, or the
output can be limited to a subset of entries based on the following:
• Specific prefix
• Specific VC label value
• Specific assigning interface
Note This command displays ATM label bindings learned by the Label Distribution Protocol (LDP) or Tag
Distribution Protocol (TDP). TDP is not supported for LDP features in Cisco IOS 12.0(30)S and later
releases, 12.2(27)SBC and later 12.2S releases, and 12.3(14)T and later releases.
Note The show mpls ip binding command includes the output generated by the show mpls atm-ldp bindings
command and information about label bindings for packet interfaces.
Examples The following is sample output from the show mpls atm-ldp bindings command:
Router# show mpls atm-ldp bindings
Destination: 10.24.0.0/24
Tailend Router ATM1/0.1 1/39 Active, VCD=3
Destination: 10.15.0.15/32
Tailend Router ATM1/0.1 1/33 Active, VCD=4
Destination: 10.0.7.7/32
Headend Router ATM1/0.1 (2 hops) 1/34 Active, VCD=810
The following is sample output from the show mpls atm-ldp bindings command on an ATM switch:
Router# show mpls atm-ldp bindings
Destination: 172.16.0.0/16
Tailend Switch ATM0/0/3 1/35 Active -> Terminating Active
Destination: 10.4.4.4/32
Transit ATM0/0/3 1/33 Active -> ATM0/1/1 1/33 Active
12.0(21)ST This command was integrated into Cisco IOS Release 12.0(21)ST.
12.0(22)S This command was integrated into Cisco IOS Release 12.0(22)S.
12.0(23)S This command was integrated into Cisco IOS Release 12.0(23)S.
12.2(13)T This command was integrated into Cisco IOS Release 12.2(13)T.
12.2(14)S This command was integrated into Cisco IOS Release 12.2(14)S.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB and
i
mplemented on the Cisco 10000-PRE2 router.
12.4(20)T This command was removed.
Release Modification