Specifications

show mpls atm-ldp bindwait
MP-580
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show mpls atm-ldp bindwait
Note Effective with Cisco IOS Release 12.4(20)T, the show mpls atm-ldp bindwait command is not
available in Cisco IOS software.
To display the number of bindings waiting for label assignments from a remote Multiprotocol Label
Swi
tching (MPLS) ATM switch, use the show mpls atm-ldp bindwait command in privileged EXEC
mode.
show mpls atm-ldp bindwait
Syntax Description This command has no arguments or keywords.
Command Modes Privileged EXEC (#)
Command History
Usage Guidelines Use this command to display information about virtual circuits (VCs) in the bindwait state.
Examples The following is sample output from the show mpls
atm-ldp bindwait command:
Router# show mpls atm-ldp bindwait
Waiting for bind on ATM1/0.2
10.3.3.1/32 10.3.3.1/32 10.3.3.2/32
10.3.3.2/32 10.3.3.3/32 10.3.3.3/32
10.3.3.4/32 10.3.3.4/32 10.3.3.5/32
10.3.3.5/32 10.3.3.6/32 10.3.3.6/32
10.3.3.7/32 10.3.3.7/32 10.3.3.8/32
10.3.3.8/32 10.3.3.9/32 10.3.3.9/32
.
.
.
Release Modification
12.0(5)T This command was introduced.
12.2(4)T This command was modified to use MPLS Internet Engineering Task Force
(I
ETF) command syntax and terminology.
12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T.
12.0(21)ST This command was integrated into Cisco IOS Release 12.0(21)ST.
12.0(22)S This command was integrated into Cisco IOS Release 12.0(22)S.
12.0(23)S This command was integrated into Cisco IOS Release 12.0(23)S.
12.2(13)T This command was integrated into Cisco IOS Release 12.2(13)T.
12.2(14)S This command was integrated into Cisco IOS Release 12.2(14)S.
12.4(20)T This command was removed.