Specifications

show mpls atm-ldp capability
MP-582
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show mpls atm-ldp capability
Note Effective with Cisco IOS Release 12.4(20)T, the show mpls atm-ldp capability command is not
available in Cisco IOS software.
To display the Multiprotocol Label Switching (MPLS) ATM capabilities negotiated with Label
D
istribution Protocol (LDP) neighbors for label-controlled (LC)-ATM interfaces, use the show mpls
atm-ldp capability command in privileged EXEC mode.
show mpls atm-ldp capability
Syntax Description This command has no arguments or keywords.
Command Default This command always displays all the MPLS ATM capabilities negotiated with all the LDP neighbors.
Command Modes Privileged EXEC (#)
Command History
Usage Guidelines When two label switch routers (LSRs) establish an LDP session, they negotiate parameters for the
se
ssion, such as the range of virtual path identifiers (VPIs) and virtual channel identifiers (VCIs) that
will be used as labels.
Release Modification
11.1CT This command was introduced.
12.0(10)ST This command was modified to use MPLS Internet Engineering Task Force
(I
ETF) command syntax and terminology.
12.0(14)ST This command was integrated into Cisco IOS Release 12.0(14)ST.
12.1(2)T This command was integrated into Cisco IOS Release 12.1(2)T.
12.1(8a)E This command was integrated into Cisco IOS Release 12.1(8a)E.
12.2(2)T This command was integrated into Cisco IOS Release 12.2(2)T.
12.2(4)T This command was integrated into Cisco IOS Release 12.2(4)T.
12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T.
12.0(21)ST This command was integrated into Cisco IOS Release 12.0(21)ST.
12.0(22)S This command was integrated into Cisco IOS Release 12.0(22)S.
12.0(23)S This command was integrated into Cisco IOS Release 12.0(23)S.
12.2(13)T This command was integrated into Cisco IOS Release 12.2(13)T.
12.2(14)S This command was integrated into Cisco IOS Release 12.2(14)S.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB and
i
mplemented on the Cisco 10000-PRE2 router.
12.4(20)T This command was removed.