Specifications

sshow mpls atm-ldp summary
MP-585
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
sshow mpls atm-ldp summary
Note Effective with Cisco IOS Release 12.4(20)T, the show mpls atm-ldp summary command is not
available in Cisco IOS software.
To display summary information about all the entries in the ATM label binding database, use the show
mpls a
tm-ldp summary command in privileged EXEC mode.
show mpls atm-ldp summary
Syntax Description This command has no arguments or keywords.
Command Modes Privileged EXEC (#)
Command History
Usage Guidelines Use this command to display dynamic ATM accounting information.
Examples The following is sample output from the show mpls
atm-ldp summary command:
Router# show mpls atm-ldp summary
Total number of destinations: 406
ATM label bindings summary
interface total active local remote Bwait Rwait IFwait
Release Modification
11.1CT This command was introduced.
12.0(10)ST This command was modified to use Multiprotocol Label Switching (MPLS)
In
ternet Engineering Task Force (IETF) command syntax and terminology.
12.0(14)ST This command was integrated into Cisco IOS Release 12.0(14)ST.
12.1(2)T This command was integrated into Cisco IOS Release 12.1(2)T.
12.1(8a)E This command was integrated into Cisco IOS Release 12.1(8a)E.
12.2(2)T This command was integrated into Cisco IOS Release 12.2(2)T.
12.2(4)T This command was integrated into Cisco IOS Release 12.2(4)T.
12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T.
12.0(21)ST This command was integrated into Cisco IOS Release 12.0(21)ST.
12.0(22)S This command was integrated into Cisco IOS Release 12.0(22)S.
12.0(23)S This command was integrated into Cisco IOS Release 12.0(23)S.
12.2(13)T This command was integrated into Cisco IOS Release 12.2(13)T.
12.2(14)S This command was integrated into Cisco IOS Release 12.2(14)S.
12.4(20)T This command was removed.