Specifications

show mpls cos-map
MP-587
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show mpls cos-map
Note Effective with Cisco IOS Release 12.4(20)T, the show mpls cos-map command is not available in
Cisco IOS software.
To display the quality of service (QoS) map used to assign a quantity of label virtual circuits and the
a
ssociated class of service (CoS) for those virtual circuits, use the show mpls cos-map command in
privileged EXEC mode.
show mpls cos-map [co
s-map]
Syntax Description
Command Modes Privileged EXEC (#)
Command History
Usage Guidelines Not entering a specific QoS number ca
uses all QoS maps to be displayed.
Note Cisco 10000 series routers do not use the show mpls cos-map command.
Examples The following is sample output from the sho
w mpls cos-map command:
Router# show mpls cos-map 2
cos-map 2 class Label-VC
3 control
2 control
1 available
0 available
Table 89 describes the significant fields shown in the display.
cos-map (Optional) Number specifying the QoS map to be displayed.
Release Modification
12.0(5)T This command was introduced.
12.0(10)ST This command was modified to match Multiprotocol Label Switching
(
MPLS) syntax and terminology.
12.2(2)T This command was integrated into Cisco IOS Release 12.2(2)T.
12.2(25)S The heading in the output was changed from tag-vc to label-vc.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB.
12.4(20)T This command was removed.