Specifications

show mpls forwarding vrf
MP-591
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show mpls forwarding vrf
To display label forwarding information for advertised Virtual Private Network (VPN) routing and
forwarding (VRF) instance routes, use the show mpls forwarding vrf command in privileged EXEC
mode. To disable the display of label forwarding information, use the no form of this command.
show mpls forwarding vrf vr
f-name [ip-prefix/length [mask]] [detail] [output-modifiers]
no show mpls forwarding vrf vr
f-name [ip-prefix/length [mask]] [detail] [output-modifiers]
Syntax Description
Command Default No default behavior or values.
Command Modes Privileged EXEC
Command History
Usage Guidelines Use this command to display label forwarding entries associated with a particular VRF or IP prefix.
vrf-name Displays network layer reachability information (NLRI) associated with the
nam
ed VRF.
ip-prefix/l
ength (Optional) IP prefix address (in dotted decimal format) and length of mask
(0 to 32).
mask (Optional) Destination network mask, in dotted decimal format.
detail (Optional) Displays detailed information on the VRF routes.
output-modifiers (Optional) For a list of associated keywords and arguments, use
c
ontext-sensitive help.
Release Modification
12.0(5)T This command was introduced.
12.0(21)ST This command was modified to reflect new Multiprotocol Label Switching
(M
PLS) Internet Engineering Taskforce (IETF) terminology and CLI
command syntax and was integrated into Cisco IOS Release 12.0(21)ST.
12.0(22)S This command was integrated into Cisco IOS Release 12.0(22)S.
12.0(23)S This command was integrated into Cisco IOS Release 12.0(23)S.
12.2(13)T This command was integrated into Cisco IOS Release 12.2(13)T.
12.2(14)S This command was integrated into Cisco IOS Release 12.2(14)S.
12.2(22)S The command output was modified so that directly connected VRF networks
no l
onger display as aggregate; no label appears instead.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
i
n a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.