Specifications

show mpls interfaces
MP-601
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show mpls interfaces
To display information about one or more or all interfaces that are configured for label switching, use
the show mpls interfaces command in user EXEC or privileged EXEC mode.
show mpls interfaces [in
terface | vrf vpn-name] [all] [detail] [internal]
Syntax Description
Defaults If no optional keyword or argument is specified in this command, summary information is displayed for
ea
ch interface that has been configured for label switching in the default routing domain.
Command Modes User EXEC
Privileged EXEC
Command History
interface (Optional) Defines the interface about which to display label switching
i
nformation.
vrf vp
n-name (Optional) Displays information about the interfaces that have been
configured for label switching for the specified Virtual Private Network
(VPN) routing and forwarding (VRF) instance (vpn-name).
all (Optional) When the al
l keyword is specified alone in this command,
information about the interfaces configured for label switching is displayed
for all VPNs, including the VPNs in the default routing domain.
detail (Optional) Displays detailed label switching information.
internal (Optional) Indicates whether Multiprotocol Label Switching (MPLS) egress
N
etFlow accounting is enabled.
Release Modification
11.1CT This command was introduced.
12.1(3)T This command was updated with MPLS command syntax and terminology.
12.0(10)ST The int
ernal keyword was added.
12.0(14)ST This command was modified to reflect MPLS VPN support for LDP.
12.1(2)T This command was integrated into Cisco IOS Release 12.1(2)T.
12.1(8a)E This command was integrated into Cisco IOS Release 12.1(8a)E.
12.2(2)T This command was integrated into Cisco IOS Release 12.2(2)T.
12.2(25)S This command was modified to show Border Gateway Protocol (BGP) and
sta
tic routing information.
12.0(22)S This command was integrated into Cisco IOS Release 12.0(22)S.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2(33)SRB This command was integrated into Cisco IOS Release 12.2(33)SRB.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
i
n a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.