Specifications

show mpls ip binding
MP-608
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
Usage Guidelines The show mpls ip binding command displays label bindings learned by LDP or the Tag Distribution
Protocol (TDP).
Note TDP is not supported for LDP features in Cisco IOS 12.0(30)S and later releases, 12.2(27)SBC and later
12.2S releases, and 12.3(14)T and later releases.
To summarize information about label bindings learned by LDP, use the show mpls ip binding
summary command in user EXEC or privileged EXEC mode.
A request can specify that the entire database be displayed, that a summary of entries from the database
be
displayed, or that the display be limited to a subset of entries. The subset can be limited according to
any of the following:
• Prefix
• Input or output label values or ranges
• Neighbor advertising the label
• Interface for label bindings of interest (LC-ATM only)
Note LC-ATM label binding interface does not apply to the Cisco 10000 series routers.
• Generic (non-LC-ATM) label bindings
• LC-ATM label bindings
Note LC-ATM label binding interface does not apply to the Cisco 10000 series routers.
Examples The following is sample output from the s
how mpls ip binding command. The output shows all the label
bindings in the database.
Router# show mpls ip binding
10.0.0.0/8
in label: 20
out label: 26 lsr: 10.0.0.55:0
out vc label: 1/80 lsr: 10.0.7.7:2 ATM1/0.8
Active ingress 3 hops (vcd 49)
172.16.0.0/8
in label: 25
in vc label: 1/36 lsr: 10.0.7.7:2 ATM1/0.8
Active egress (vcd 55)
out label: imp-null lsr: 10.0.0.55:0 inuse