Specifications

show mpls ip binding
MP-612
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
out label Outgoing label. This is a remote label learned from an LDP neighbor. The
neighbor is identified by its LDP ID in the lsr field.
inuse Indicates that the outgoing label is in use for Multiprotocol Label Switching
(
MPLS) forwarding, that is, it is installed in the MPLS forwarding table (the
Label Forwarding Information Base [LFIB]).
in vc label Incoming MPLS ATM label. This is the local VPI/VCI assigned by the LSR
as
the incoming label for the destination and advertised to the upstream
LSRs.
Note This field applies to the Cisco 7500 series routers only.
out vc label Outgoing MPLS ATM label. This is the VPI/VCI learned from the
d
estination next hop as its label for the destination and advertised to this
LSR.
Note This field applies to the Cisco 7500 series routers only.
ATM1/0.8 The ATM interface with which the MPLS ATM label is associated.
Note This field applies to the Cisco 7500 series routers only.
Active State of the label VC (LVC) associated with the destination prefix.
Note This field applies to the Cisco 7500 series routers only.
States are the following:
• Active. Established and operational.
• Bindwait. Waiting for a response from the destination next hop.
• Remote Resource Wait. Waiting for resources (VPI/VCI) to become
available on the destination next hop.
• Parent Wait. Transit LVC upstream side waiting for downstream side to
become active.
• AbortAckWait. Waiting for response to a Label Abort message sent to
the destination next hop.
• ReleaseWait. Waiting for response to a Label Withdraw message sent to
an upstream neighbor.
Table 96 show mpls ip binding Field Descriptions (continued)
Field Description