Specifications

show mpls ip binding
MP-613
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
The following sample output displays detailed information about the label bindings:
Router# show mpls ip binding detail
10.0.0.0/8, rev 2, chkpt: add-skipped
in label: imp-null (owner LDP)
Advertised to:
10.60.60.60:0 10.30.30.30:0
out label: imp-null lsr: 10.60.60.60:0
out label: imp-null lsr: 10.30.30.30:0
10.10.10.10/32, rev 18, chkpt: added
in label: 17 (owner LDP)
Advertised to:
10.60.60.60:0 10.30.30.30:0
out label: 142 lsr: 10.60.60.60:0
out label: 19 lsr: 10.30.30.30:0 inuse
10.0.0.1/32, rev 10, chkpt: add-skipped
in label: imp-null (owner LDP)
Advertised to:
10.60.60.60:0 10.30.30.30:0
out label: 21 lsr: 10.60.60.60:0
out label: 17 lsr: 10.30.30.30:0
10.30.30.30/32, rev 20, chkpt: added
in label: 18 (owner LDP)
Advertised to:
10.60.60.60:0 10.30.30.30:0
out label: 22 lsr: 10.60.60.60:0
vcd 49 Virtual circuit descriptor number for the LVC.
Note This field applies to the Cisco 7500 series routers only.
ingress 3 hops Indicates whether the LSR is an ingress, transit, or egress node for the
des
tination.
Note This field applies to the Cisco 7500 series routers only.
Options include the following:
• Ingress 3 hops. The LSR is an ingress edge router for the MPLS ATM
cloud for the destination.
• Egress. The LSR is an egress edge router for the MPLS ATM cloud for
the destination.
• Transit. The LSR is a transit LSR within the MPLS ATM cloud for the
destination.
Table 96 show mpls ip binding Field Descriptions (continued)
Field Description