Specifications

show mpls ip iprm ldm
MP-620
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show mpls ip iprm ldm
To display information about the IP Label Distribution Modules (LDMs) that have registered with the IP
Rewrite Manager (IPRM), use the show mpls ip iprm ldm command in privileged EXEC mode.
show mpls ip iprm ldm [ta
ble {all | table-id} | vrf vrf-name] [ipv4 | ipv6]
Cisco 10000 Series Routers
show mpls ip iprm ldm [table {all | table-id} | vrf vrf-name] [ipv4]
Syntax Description
Defaults If you do not specify any keywords or parameters, the command displays the LDMs for the global
ro
uting table (the default).
Command Modes Privileged EXEC
Command History
Usage Guidelines This command displays the IP LDMs registered with IPRM.
table (Optional) Displays the LDMs for one or more routing tables.
all Displays the LDMs for all routing tables.
table-id Displays the LDMs for the routing table you specify. Table 0 is the default
o
r global routing table.
vrf (Optional) Displays the LDMs for the VPN routing and forwarding (VRF)
ins
tance you specify.
vrf-name (Optional) The name of the VRF instance. You can find VRF names with the
sh
ow ip vrf command.
ipv4 (Optional) Displays IPv4 LDMs.
ipv6 (Optional) Displays IPv6 LDMs.
Note Applies to Cisco 7500 series routers only.
Release Modification
12.2(25)S This command was introduced.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB and
i
mplemented on the Cisco 10000 series routers.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2(33)SXH This command was integrated into Cisco IOS Release 12.2(33)SSH.
12.4(20)T This command was integrated into Cisco IOS Release 12.4(20)T.