Specifications

show mpls l2 vc detail
MP-623
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show mpls l2 vc detail
To display detailed information related to the virtual connection (VC), use the show mpls l2 vc detail
command in user EXEC or privileged EXEC mode.
show mpls l2 vc vc
-id detail
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
Examples This example shows how to display detailed status for a specific VC:
Router# show mpls l2 vc 1100 detail
Local interface: VFI VPLS-1100 up
MPLS VC type is VFI, internetworking type is Ethernet
Destination address: 1.1.1.1,VC ID:1100, VC status: up
Output interface: Tu0,imposed label stack {27 17}
Preferred path: not configured
Default path: active
Next hop:point2point
Create time:2d23h, last status change time: 2d23h
Signaling protocol: LDP, peer 1.1.1.1:0 up
MPLS VC labels: local 17, remote 17
Group ID: local 0, remote 0
MTU: local 1500, remote 1500
Remote interface description:
Sequencing: receive disabled, send disabled
VC statistics
packet totals: receive 1146978, send 3856011
byte totals: receive 86579172, send 316899920
packet drops: receive 0, send 0
The following examples show the status of the active and backup pseudowires before, during, and after
a switchover.
The sho
w mpls l2 vc detail command on the active PE router displays the status of the pseudowires.
Router# show mpls l2 vc detail
vc-id Name of the VC.
Release Modification
12.2(33)SRA This command was introduced.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
i
n a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.
12.2(33)SRE This command was modified. STANDBY and HOTSTANDBY were added
a
s options for the Status column in output displays.