Specifications

show mpls l2transport binding
MP-629
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
The following sample output shows information about L2VPN multisegment pseudowires (in bold):
Router# show mpls l2transport binding
Destination Address: 10.1.1.1, VC ID: 102
Local Label: 17
Cbit: 1, VC Type: Ethernet, GroupID: 0
MTU: 1500, Interface Desc: n/a
VCCV: CC Type: CW [1], RA [2], TTL [3]
CV Type: LSPV [2]
Remote Label: 16
Cbit: 1, VC Type: Ethernet, GroupID: 0
MTU: 1500, Interface Desc: n/a
VCCV: CC Type: CW [1], RA [2], TTL [3]
CV Type: LSPV [2]
PW Switching Point:
Vcid local IP addr remote IP addr Description
101 10.11.11.11 10.20.20.20 PW Switching Point PE3
100 10.20.20.20 10.11.11.11 PW Switching Point PE2
Table 102 describes the significant fields shown in the display.
CEM circuits are supported on the Cisco 7600 series router transport time-division multiplexing (TDM)
tr
affic. The following example displays AToM VCs and the applicable local and remote CEM settings as
exchanged over LDP label mapping messages.
Router# show mpls l2transport binding
Destination Address: 10.7.1.1, VC ID: 100
Local Label: 18
Cbit: 1, VC Type: CESoPSN BRI, GroupID: 0
MTU: 1500, Interface Desc: n/a
VCCV: CC Type: RA [2]
CV Type: LSPV [2]
CEM/TDM Options
Payload Bytes: 80, Payload Type: 0
SP bits: 11 - Data/Signaling, CAS Type: CAS T1 SF
RTP header in use: Yes, Bitrate (Kbit/s): 64
Differential Timestamp Mode: disabled
Clock Frequency (kHz): 64
Synchronization Source id: 0
Remote Label: 19
Cbit: 1, VC Type: CESoPSN BRI, GroupID: 0
MTU: 1500, Interface Desc: n/a
VCCV: CC Type: RA [2]
CV Type: LSPV [2]
CEM/TDM Options
Payload Bytes: 80, Payload Type: 0
SP bits: 11 - Data/Signaling, CAS Type: CAS T1 SF
RTP header in use: Yes, Bitrate (Kbit/s): 64
Ta b l e 102 show mpls l2transport binding Field Descriptions for Multisegment Pseudowires
Field Description
TTL The Time to Live (TTL) setting of the label.
Vcid The virtual circuit identifier.
local IP addr The local IP address assigned to the switching point.
remote IP addr The remote IP address assigned to the switching point.
Description The description assigned to the switching point.