Specifications

show mpls l2transport binding
MP-630
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
Differential Timestamp Mode: disabled
Clock Frequency (kHz): 64
Synchronization Source id: 0
The following example shows the VC label binding information for the control word, which in this case
is set to 0, meaning that it is disabled:
Router# show mpls l2transport binding 102
Destination Address: 10.1.1.3, VC ID: 102
Local Label: 1004
Cbit: 0, VC Type: Ethernet, GroupID: 0
MTU: 1500, Interface Desc: n/a
VCCV: CC Type: CW [1], RA [2]
CV Type: LSPV [2]
Remote Label: 1005
Cbit: 0, VC Type: Ethernet, GroupID: 0
MTU: 1500, Interface Desc: n/a
VCCV: CC Type: RA [2]
CV Type: LSPV [2]
The following example shows the maximum number of cells that can be packed (in bold) for both
provider edge routers, as specified by the cell-packing command:
Router# show mpls l2transport binding 1010
Destination Address: 10.6.1.2, VC ID: 1010
Local Label: 20008
Cbit: 1, VC Type: ATM VCC CELL, GroupID: 0
MTU: n/a, Interface Desc: n/a
Max Concatenated ATM Cells: 10
VCCV: CC Type: CW [1], RA [2]
CV Type: LSPV [2], BFD [3]
Remote Label: 47
Cbit: 1, VC Type: ATM VCC CELL, GroupID: 0
MTU: n/a, Interface Desc: n/a
Max Concatenated ATM Cells: 10
VCCV: CC Type: CW [1], RA [2]
CV Type: LSPV [2]
Related Commands Command Description
show mpls l2transport
h
w-capability
Displays the transport types and their supported capabilities.
show mpls l2transport
vc
Displays information about AToM VCs and static pseudowires that have
be
en enabled to route Layer 2 packets on a router.