Specifications

show mpls l2transport hw-capability
MP-632
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show mpls l2transport hw-capability
To display the transport types supported on an interface, use the show mpls l2transport hw-capability
command in privileged EXEC mode.
show mpls l2transport hw-capability interface typ
e number
Syntax Description
Command Modes Privileged EXEC (#)
Command History
Usage Guidelines This command can help you determine the interface to use for the various transport types. Use this
co
mmand to check if core-facing and edge-facing interfaces can accommodate different transport types.
Examples The following is partial sample output of the s
how mpls l2transport hw-capability command for Cisco
IOS Releases 12.0(23)S, 12.2(14)S, and 12.2(15)T and later. For more information on the fields, see
Table 103.
Router# show mpls l2transport hw-capability interface serial5/1
Interface Serial5/1
Transport type FR DLCI
Core functionality:
MPLS label disposition supported
Control word processing supported
Sequence number processing not supported
Edge functionality:
MPLS label imposition supported
Control word processing supported
Sequence number processing not supported
.
.
interface Displays information for the specified interface.
type number Type and number of the interface. For example, serial6/0.
Release Modification
12.0(23)S This command was introduced.
12.2(14)S This command was integrated into Cisco IOS Release 12.2(14)S.
12.2(15)T This command was integrated into Cisco IOS Release 12.2(15)T.
12.0(27)S This command was updated to display AToM Virtual Circuit Connection
V
erification (VCCV) information.
12.2(18)SXE This command was integrated into Cisco IOS Release 12.2(18)SXE.
12.2(30)S This command was updated to display VCCV type capabilities.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2(33)SCC This command was integrated into Cisco IOS Release 12.2(33)SCC.