Specifications

show mpls l2transport summary
MP-635
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show mpls l2transport summary
To display summary information about virtual circuits (VCs) that have been enabled to route Any
Transport over MPLS (AToM) Layer 2 packets on a router, use the show mpls l2transport summary
command in privileged EXEC mode.
show mpls l2transport summary
Syntax Description This command has no arguments or keywords.
Command Modes Privileged EXEC (#)
Command History
Examples The following is a sample output of the sho
w mpls l2transport summary command that shows
summary information about the VCs that have been enabled to transport Layer 2 packets:
Router# show mpls l2transport summary
Destination address: 10.16.24.12 Total number of VCs: 60
0 unknown, 58 up, 0 down, 2 admin down
5 active vc on MPLS interface PO4/0
The following is a sample output of the show mpls l2transport summary command that shows
summary information about the VCs that have been enabled to transport Layer 2 packets on a
Cisco uBR10012 router:
Router# show mpls l2transport summary
Destination address: 10.76.1.1, total number of vc: 6
0 unknown, 5 up, 1 down, 0 admin down, 0 recovering, 0 standby
5 active vc on MPLS interface Gi3/0/0
Release Modification
12.0(23)S This command was introduced.
12.2(14)S This command was integrated into Cisco IOS Release 12.2(14)S.
12.2(15)T This command was integrated into Cisco IOS Release 12.2(15)T.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
i
n a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.
12.2(33)SCC This command was integrated into Cisco IOS Release 12.2(33)SCC.