Specifications

show mpls l2transport summary
MP-636
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
Table 104 describes the fields shown in the show mpls l2transport summary command display.
Related Commands
Ta b l e 104 show mpls l2transport summary Field Descriptions
Field Description
Destination address IP address of the remote router to which the VC has been established.
Total number of
VC
s
Number of VCs that have been established.
unknown Number of VCs that are in an unknown state.
up Number of VCs that are operational.
down Number of VCs that are not operational.
admin down Number of VCs that have been disabled.
Command Description
show mpls l2transport
binding
Displays virtual circuit (VC) label binding information.
show mpls l2transport
chec
kpoint
Displays the checkpoint information about Any Transport over MPLS
(AToM) virtual circuits.
show mpls l2transport
h
w-capability
Displays the transport types and their supported capabilities.
show mpls l2transport vc Displays information about AToM VCs that have been enabled to route
L
ayer 2 packets on a router.