Specifications

show mpls l2transport vc
MP-637
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show mpls l2transport vc
To display information about Any Transport over MPLS (AToM) virtual circuits (VCs) and static
pseudowires that have been enabled to route Layer 2 packets on a router, use the sh
ow mpls l2transport
vc command in user EXEC or privileged EXEC mode.
show mpls l2transport vc [[vc
id vc-id-min | vc-id-min] [vc-id-max]] [interface type number
[local-circuit-id]] [destination {ip-address | host-name}] [detail]
Syntax Description
Command Modes User EXEC (>)
Privileged EXEC (#)
Command History
vcid (Optional) Specifies the VC ID.
vc-id-min (Optional) Minimum VC ID value. The range is from 1 to
4294
967295.
vc-id-max (Optional) Maximum VC ID value. The range is from 1 to
4294
967295.
interface (Optional) Specifies the interface or subinterface of the router that
h
as been enabled to transport Layer 2 packets. Use this keyword to
d
isplay information about the VCs that have been assigned VC IDs
on that interface or subinterface.
type Interface type. For more information, use the question mark (?)
o
nline help function.
number Interface or subinterface number. For more information about the
num
bering syntax for your networking device, use the question mark
(?) online help function.
local-circuit-id (Optional) The number assigned to the local circuit. This argument
v
alue is supported only with the following transport types:
• For Frame Relay, enter the data-link connection identifier
(DLCI) of the permanent virtual circuit (PVC).
• For ATM adaptation layer 5 (AAL5) and cell relay, enter the
virtual path identifier (VPI) or virtual channel identifier (VCI) of
the PVC.
• For Ethernet VLANs, enter the VLAN number.
destination (Optional) Specifies the remote router.
ip-address (Optional) The IP address of the remote router.
host-name (Optional) The name assigned to the remote router.
detail (Optional) Specifies the detailed information about the VCs.
Release Modification
12.1(8a)E This command was introduced.
12.0(21)ST This command was integrated into Cisco IOS Release 12.0(21)ST.