Specifications

show mpls l2transport vc
MP-643
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
The following example shows the command output of the show mpls l2transport vc detail command
when the VPLS Autodiscovery feature has configured on the VPLS pseudowires. The output that is
specific to VPLS Autodiscovery is show in bold.
Router# show mpls l2transport vc detail
Local interface: VFI my_test VFI up
MPLS VC type is VFI, interworking type is Ethernet
Destination address: 10.3.3.1, VC ID: 123456, VC status: up
Next hop PE address: 10.55.55.2
Output interface: Et3/0, imposed label stack {17 19}
Preferred path: not configured
Default path:
Next hop: 10.1.0.2
Create time: 2d05h, last status change time: 2d05h
Signaling protocol: LDP, peer 10.55.55.2:0 up
MPLS VC labels: local 21, remote 19
AGI: type 1, len 8, 0000 3333 4F4E 44C4
Local AII: type 1, len 4, 0909 0909 (10.9.9.9)
Remote AII: type 1, len 4, 0303 0301 (10.3.3.3)
Group ID: local 0, remote 0
MTU: local 1500, remote 1500
Remote interface description:
Sequencing: receive disabled, send disabled
VC statistics:
packet totals: receive 22611, send 22611
byte totals: receive 2346570, send 2853581
packet drops: receive 0, send 0
SSM segment/switch IDs The IDs used to refer to the control plane and data plane for this VC. This
data is not for customer use but for Cisco personnel for troubleshooting
purposes. When the Source Specific Multicast (SSM) IDs are followed by
the word “used,” the checkpointed data has been successfully sent and not
released.
PWID The pseudowire ID used in the data plane to correlate the switching context
f
or the segment mentioned with the MPLS switching context. This data is
not for customer use but for Cisco personnel for troubleshooting purposes.
packet totals Number of packets sent and received. Received packets are those AToM
p
ackets received from the MPLS core. Sent packets are those AToM packets
sent to the MPLS core. This does not include dropped packets.
Note If the VC statistics fields include the word “transit,” the output
shows the number of packets and bytes being sent from the router.
byte totals Number of bytes sent and received from the core-facing interface, including
t
he payload, control word if present, and AToM VC label.
Note If the VC statistics fields include the word “transit,” the output
shows the number of packets and bytes being sent from the router.
packet drops Number of dropped packets.
Note If the VC statistics fields include the word “transit,” the output
shows the number of packets and bytes being sent from the router.
Table 106 show mpls l2transport vc detail Field Descriptions (continued)
Field Description