Specifications

Table Of Contents
show mpls l2transport vc
MP-645
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
Default path: active
Next hop: 10.0.0.1
Create time: 00:39:30, last status change time: 00:26:48
Signaling protocol: LDP, peer 10.1.1.1:0 up
Targeted Hello: 10.1.1.2(LDP Id) -> 10.1.1.1
Status TLV support (local/remote) : enabled/supported
Label/status state machine : established, LruRru
Last local dataplane status rcvd: no fault
Last local SSS circuit status rcvd: no fault
Last local SSS circuit status sent: no fault
Last local LDP TLV status sent: no fault
Last remote LDP TLV status rcvd: PW DOWN(rx,tx faults)
MPLS VC labels: local 2000, remote 10240
Group ID: local 6, remote 0
MTU: local 1500, remote 1500
Remote interface description:
Sequencing: receive disabled, send disabled
VC statistics:
packet totals: receive 243651, send 243705
byte totals: receive 27768366, send 34109320
packet drops: receive 0, send 0
Table 108 describes the fields shown in the display.
Ta b l e 108 show mpls l2transport vc detail Field Descriptions for the MPLS Pseudowire
Signaling Status Feature
Field Description
Status TLV support
(
local/remote)
For the local router, the output indicates whether the MPLS Pseudowire
Signaling Status feature is enabled or disabled. For the remote router, the
output indicates whether the MPLS Pseudowire Signaling Status feature is
supported.
Label/status state
mac
hine
The first value in the output indicates whether label advertisement has been
established or not. The second value (LruRru) indicates the status of the local
and remote routers. The following list translates the status codes:
L—local router
R—remote router
r or n—ready (r) or not ready (n)
u or d—up (u) or down (d) status
These values are also displayed in the output:
D—Dataplane
S—Local shutdown
Last local dataplane
s
tatus rcvd
The last status message received about the dataplane on the local router.
Last local SSS circuit
s
tatus rcvd
The last status message received about the subscriber service switch (SSS)
on the local router.
Last local SSS circuit
st
atus sent
The last status message sent about the subscriber service switch on the local
router.