Specifications

show mpls ldp backoff
MP-649
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show mpls ldp backoff
To display information about the configured session setup backoff parameters and any potential Label
Distribution Protocol (LDP) peers with which session setup attempts are being throttled, use the show
mpls ldp backoff command in user EXEC or privileged EXEC mode.
show mpls ldp backoff [vr
f vrf-name | all]
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
vrf vr
f-name (Optional) Displays backoff information for the specified Virtual Private
Network (VPN) routing and forwarding (VRF) instance (vrf-name).
all (Optional) Displays LDP discovery information for all VPNs.
Release Modification
12.0(10)ST This command was introduced.
12.0(14)ST This command was integrated into Cisco IOS Release 12.0(14)ST.
12.1(2)T This command was integrated into Cisco IOS Release 12.1(2)T.
12.1(8a)E This command was integrated into Cisco IOS Release 12.1(8a)E.
12.2(2)T This command was integrated into Cisco IOS Release 12.2(2)T.
12.2(4)T This command was integrated into Cisco IOS Release 12.2(4)T.
12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T.
12.0(21)ST This command was integrated into Cisco IOS Release 12.0(21)ST.
12.0(22)S This command was integrated into Cisco IOS Release 12.0(22)S.
12.0(23)S This command was integrated into Cisco IOS Release 12.0(23)S.
12.2(13)T This command was integrated into Cisco IOS Release 12.2(13)T.
12.2(14)S This command was integrated into Cisco IOS Release 12.2(14)S.
12.2(30)S The vrf
vrf-name keyword-argument pair and the all keyword were added.
12.4(3) The vrf
vrf-name keyword-argument pair and the all keyword were added.
12.4(4)T The vrf
vrf-name keyword-argument pair and the all keyword were added.
12.0(32)S The vrf
vrf-name keyword-argument pair and the all keyword were added.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
i
n a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.