Specifications

show mpls ldp checkpoint
MP-658
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show mpls ldp checkpoint
To display information about the Label Distribution Protocol (LDP) checkpoint system on the active
route processor, use the show mpls ldp checkpoint command in user EXEC or privileged EXEC mode.
show mpls ldp checkpoint
Syntax Description This command has no arguments or keywords.
Command Modes User EXEC
Privileged EXEC
Command History
Usage Guidelines This command shows the following LDP checkpointing information:
• The status of the checkpointing system
• The status of the resend timer
• The number of Label Information Base (LIB) entries in a checkpointed state
This command displays checkpoint status information only for the active route processor.
Examples The following example shows the LDP checkpoint settings and configuration:
Router# show mpls ldp checkpoint
Checkpoint status: dynamic-sync
Checkpoint resend timer: not running
5 local bindings in add-skipped
9 local bindings in added
1 of 15+ local bindings in none
Release Modification
12.2(25)S This command was introduced.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB and
i
mplemented on the Cisco 10000 series routers.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2(33)SXH This command was integrated into Cisco IOS Release 12.2(33)SXH.