Specifications

show mpls ldp neighbor
MP-671
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show mpls ldp neighbor
To display the status of Label Distribution Protocol (LDP) sessions, use the show mpls ldp neighbor
command in user EXEC or privileged EXEC mode.
show mpls ldp neighbor [vr
f vrf-name | all] [address | interface] [detail] [graceful-restart]
Syntax Description
Defaults This command displays information about LDP neighbors for the default routing domain if you do not
sp
ecify the optional vrf keyword.
Command Modes User EXEC
Privileged EXEC
Command History
vrf vr
f-name (Optional) Displays the LDP neighbors for the specified Virtual Private
Network (VPN) routing and forwarding (VRF) instance.
all (Optional) Displays LDP neighbor information for all VPNs, including those
i
n the default routing domain.
address (Optional) Identifies the neighbor with this IP address.
interface (Optional) Identifies the LDP neighbors accessible over this interface.
detail (Optional) Displays information in long form, including password
i
nformation for this neighbor.
graceful-restart (Optional) Displays per-neighbor graceful restart information.
Release Modification
11.1CT This command was introduced.
12.0(10)ST The command was modified to reflect Multiprotocol Label Switching
(M
PLS) Internet Engineering Task Force (IETF) command syntax and
terminology.
12.0(14)ST This command was modified to reflect MPLS VPN support for LDP and the
vr
f and all keywords were added.
12.1(8a)E This command was integrated into Cisco IOS Release 12.1(8a)E.
12.2(2)T This command was integrated into Cisco IOS Release 12.2(2)T.
12.0(22)S This command was integrated into Cisco IOS Release 12.0(22)S.
12.2(14)S This command was integrated into Cisco IOS Release 12.2(14)S.
12.0(26)S The de
tail keyword was updated to display information about inbound
filtering.
12.2(25)S The gr
aceful-restart keyword was added.
12.3(14)T The command output was updated so that the det
ail keyword displays
information about MPLS LDP Session Protection.
12.2(18)SXE This command was integrated into Cisco IOS Release 12.2(18)SXE.