Specifications

show mpls ldp neighbor password
MP-680
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
Related Commands
Password Indicates the password source and status.
• Required or not required indicates whether password
configuration is required or not.
• Neighbor, none, option #, or fallback indicates the
password source when the password was configured.
None indicates that no password was configured.
• In use (current) or stale (previous) is the usage status of
the current LDP session password.
State State of the LDP session. Generally this is Oper
(
operational), but transient is another possible state.
Msgs sent/rcvd Numbers of LDP messages sent to and received from the
sessi
on peer. The count includes the transmission and receipt
of periodic keepalive messages, which are required for
maintaining the LDP session.
Table 118 show mpls ldp neighbor password Field Descriptions (continued)
Field Description
Command Description
mpls ldp neighbor password Configures a password key for computing MD5 checksums for the
se
ssion TCP connection with the specified neighbor.
mpls ldp password fallback Configures an MD5 password for LDP sessions with peers.
mpls ldp password option Configures an MD5 password for LDP sessions with neighbors
w
hose LDP router IDs are permitted by a specified access list.
mpls ldp password required Specifies that LDP must use a password when establishing a session
b
etween LDP peers.
mpls ldp password rollover
durat
ion
Configures the duration before the new password takes effect on an
MPLS LSR.
show mpls interfaces Displays information about one or more interfaces that have been
c
onfigured for label switching.
show mpls ldp discovery Displays the status of the LDP discovery process.
show mpls ldp neighbor Displays the status of LDP sessions.
show mpls ldp neighbor
pa
ssword
Displays password information used in established LDP sessions.