Specifications

show mpls ldp parameters
MP-681
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show mpls ldp parameters
To display current Label Distribution Protocol (LDP) parameters, use the show mpls ldp parameters
command in user EXEC or privileged EXEC mode.
show mpls ldp parameters
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values
Command Modes User EXEC
Privileged EXEC
Command History
Examples The following is sample output from the s
how mpls ldp parameters command:
Router# show mpls ldp parameters
Protocol version: 1
Downstream label pool: min label 16; max label 100000
Session hold time: 180 sec; keep alive interval: 60 sec
Discovery hello: holdtime: 15 sec; interval: 5 sec
Discovery targeted hello: holdtime: 180 sec; interval: 5 sec
LDP for targeted sessions; peer acl: 1
LDP initial/maximum backoff: 30/240 sec
Router#
Release Modification
11.1CT This command was introduced.
12.0(10)ST This command was integrated into Cisco IOS Release 12.0(10)ST. The
c
ommand was modified to reflect Multiprotocol Label Switching (MPLS)
Internet Engineering Task Force (IETF) command syntax and terminology.
12.1(8a)E This command was integrated into Cisco IOS Release 12.1(8a)E.
12.2(2)T This command was integrated into Cisco IOS Release 12.2(2)T.
12.0(22)S This command was integrated into Cisco IOS Release 12.0(22)S.
12.2(14)S This command was integrated into Cisco IOS Release 12.2(14)S.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB and
i
mplemented on the Cisco 10000-PRE2 router.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
i
n a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.