Specifications

show mpls prefix-map
MP-688
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show mpls prefix-map
Note Effective with Cisco IOS Release 12.4(20)T, the show mpls prefix-map command is not available in
Cisco IOS software.
To display the prefix map used to assign a quality of service (QoS) map to network prefixes that match
a
standard IP access list, use the show mpls prefix-map command in privileged EXEC mode.
show mpls prefix-map [pr
efix-map]
Syntax Description
Command Modes Privileged EXEC (#)
Command History
Usage Guidelines Not entering a specific pr
efix-map argument number causes all prefix maps to be displayed.
Examples The following is sample output from the sho
w mpls prefix-map command:
Router# show mpls prefix-map 2
prefix-map 2 access-list 2 cos-map 2
Table 121 describes the fields shown in the display.
prefix-map (Optional) Number specifying the prefix map to be displayed.
Release Modification
12.0(5)T This command was introduced.
12.0(10)ST This command was modified to reflect Multiprotocol Label Switching
(
MPLS) Internet Engineering Task Force (IETF) syntax and terminology.
12.2(2)T This command was integrated into Cisco IOS Release 12.2(2)T.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
i
n a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.
12.4(20)T This command was removed.
Ta b l e 121 show mpls prefix-map Field Descriptions
Field Description
prefix-map Unique number of a prefix map.
access-list Unique number of an access list.
cos-map Unique number of a QoS map.