Specifications

show mpls static binding ipv4
MP-690
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show mpls static binding ipv4
To display Multiprotocol Label Switching (MPLS) static label bindings, use the show mpls static
binding ipv4 command in privileged EXEC mode.
show mpls static binding ipv4 [pr
efix {mask-length | mask} | nexthop address] [local | remote
[nexthop address]]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines If you do not specify any optional arguments, the show
mpls static binding ipv4 command displays
information about all static label bindings. Or the information can be limited to any of the following:
• Bindings for a specific prefix or mask
• Local (incoming) labels
• Remote (outgoing) labels
• Outgoing labels for a specific next hop router
Examples In the following output, the sho
w mpls static binding ipv4 command with no optional arguments
displays all static label bindings:
Router# show mpls static binding ipv4
10.0.0.0/8: Incoming label: none;
Outgoing labels:
10.13.0.8 explicit-null
10.0.0.0/8: Incoming label: 55 (in LIB)
Outgoing labels:
10.0.0.66 2607
prefix {mask-length |
mask}
(Optional) The labels for a specific prefix.
nexthop addr
ess (Optional) Specifies the labels for a next hop address.
local | re
mote (Optional) Specifies the local (incoming) or remote (outgoing) labels to be
displayed.
nexthop addr
ess (Optional) Specifies the label bindings for prefixes with outgoing labels for
which the specified next hop is to be displayed.
Release Modification
12.0(23)S This command was introduced.
12.3(14)T This command was integrated into Cisco IOS Release 12.3(14)T.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2(33)SXH This command was integrated into Cisco IOS Release 12.2(33)SXH.
12.2(33)SB This command was integrated into Cisco IOS Release 12.2(33)SB.