Specifications

show mpls static crossconnect
MP-693
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show mpls static crossconnect
To display statically configured Label Forwarding Information Database (LFIB) entries, use the show
mpls static crossconnect command in privileged EXEC mode.
show mpls static crossconnect [lo
w label [high label]]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines If you do not specify any label parameters, then all the configured static crossconnects are displayed.
Examples The following output of the sho
w mpls static crossconnect command shows the local and remote labels:
Router# show mpls static crossconnect
Local Outgoing Outgoing Next Hop
label label interface
45 46 pos5/0 point2point
Table 122 describes the significant fields shown in the display.
Related Commands
low label high label (Optional) Displays the statically configured LFIB entries.
Release Modification
12.0(23)S This command was introduced.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2(33)SXH This command was integrated into Cisco IOS Release 12.2(33)SXH.
12.2(33)SB This command was integrated into Cisco IOS Release 12.2(33)SB.
Ta b l e 122 show mpls static crossconnect Field Descriptions
Field Description
Local label Label assigned by this router.
Outgoing label Label assigned by the next hop.
Outgoing interface Interface through which packets with this label are sent.
Next Hop IP address of next hop router’s interface that is connected to this
rou
ter’s outgoing interface.
Command Description
mpls static
cr
ossconnect
Configures an LFIB entry for the specified incoming label and outgoing
interface.