Specifications

show mpls traffic-eng destination list
MP-700
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show mpls traffic-eng destination list
To display an Multiprotocol Label Switching (MPLS) traffic engineering (TE) point-to-multipoint
(P2MP) destination list, use the show mpls traffic-eng destination list command in user EXEC or
privileged EXEC configuration mode.
show mpls traffic-eng destination list [name d
estination-list-name | identifier
destination-list-identifier]
Syntax Description
Command Modes User EXEC (>)
Privileged EXEC (#)
Command History
Usage Guidelines This command displays the information about any destination lists configured for an MPLS TE P2MP
co
nfiguration.
Examples The following example displays information about a destination list:
Router# show mpls traffic-eng destination-list
Destination list: name p2mp-list1
ip 10.3.3.3 path-option 1 dynamic
ip 10.4.4.4 path-option 15 explicit identifier 4
ip 10.5.5.5 path-option 2 explicit name r1-r2-r4-r5
Table 126 describes the significant fields shown in the display.
Related Commands
name de
stination-list-name (Optional) Specifies the name of a destination list.
identifier d
estination-list-identifier (Optional) Specifies the number of a destination list.
Release Modification
12.2(33)SRE This command was introduced.
Ta b l e 126 show mpls traffic-eng destination-list Field Descriptions
Field Description
Destination list The name of the destination list.
ip The IP address of the path’s destination.
path-option Information about the dynamic or explicit path.
Command Description
mpls traffic-eng
dest
ination-list
Creates a destination list for MPLS Point-to-Multipoint Traffic Engineering.