Specifications

show mpls traffic-eng fast-reroute database
MP-701
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show mpls traffic-eng fast-reroute database
To display the contents of the Fast Reroute (FRR) database, use the show mpls traffic-eng fast-reroute
database command in user EXEC or privileged EXEC mode.
show mpls traffic-eng fast-reroute database [ne
twork [mask | masklength] |
labels low label [-hi
gh label] | interface ifname [backup-interface ifname] | backup-interface
ifname] [state {active | ready | partial | complete}] [role {head | middle}] [detail] [vrf name]
Syntax Description network (Optional) IP address of the destination network. This functions as
t
he prefix of the FRR rewrite.
mask (Optional) Bit combination indicating the portion of the IP address
t
hat is being used for the subnet address.
masklength (Optional) Number of bits in mask of destination.
labels (Optional) Shows only database entries that possess in-labels (local
labels) assigned by this router. You specify either a starting value or
a ra
nge of values.
low label (Optional) Starting label value or lowest value in the range.
-high label (Optional) Highest label value in the range.
interface (Optional) Shows only database entries related to the primary
out
going interface.
ifname (Optional) Name of the primary outgoing interface.
backup-interface (Optional) Shows only database entries related to the backup
out
going interface.
ifname (Optional) Name of the backup outgoing interface.
state (Optional) Shows entries that match one of four possible states:
a
ctive, ready, partial, or complete.
active The FRR rewrite has been put into the forwarding database (where it
ca
n be placed onto appropriate incoming packets).
ready The FRR rewrite has been created, but has not yet been moved into
t
he forwarding database.
partial State before the FRR rewrite has been fully created; its backup
r
outing information is still incomplete.
complete State after the FRR rewrite has been assembled: it is either ready or
ac
tive.
role (Optional) Shows entries associated either with the tunnel head or
t
unnel midpoint.
head Entry associated with tunnel head.
middle Entry associated with tunnel midpoint.
detail (Optional) Shows long-form information: LFIB-FRR total number of
c
lusters, groups, and items in addition to the short-form information
of prefix, label and state.
vrf na
me (Optional) Shows entries for a Virtual Private Network (VPN)
routing/forwarding instance.