Specifications

show mpls traffic-eng fast-reroute database
MP-702
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
Command Default The contents of the FRR database are not displayed.
Command Modes User EXEC
Privileged EXEC
Command History
Examples The following example shows output from the s
how mpls traffic-eng fast-reroute database command
at a tunnel head link:
Router# show mpls traffic-eng fast-reroute database 10.0.0.0
Tunnel head fast reroute information:
Prefix Tunnel In-label Out intf/label FRR intf/label Status
10.0.0.0/16 Tu111 Tun hd PO0/0:Untagged Tu4000:16 ready
10.0.0.0/16 Tu449 Tun hd PO0/0:Untagged Tu4000:736 ready
10.0.0.0/16 Tu314 Tun hd PO0/0:Untagged Tu4000:757 ready
10.0.0.0/16 Tu313 Tun hd PO0/0:Untagged Tu4000:756 ready
Table 127 describes the significant fields shown in the display.
Release Modification
12.0(10)ST This command was introduced.
12.2(18)S This command was integrated into Cisco IOS Release 12.2(18)S.
12.2(18)SXD This command was implemented on the Catalyst 6000 series with the
SU
P720 processor.
12.2(28)SB This command was implemented on the Cisco 10000(PRE-2) router.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.4(20)T This command was integrated into Cisco IOS Release 12.4(20)T.
12.2(33)SRE This command was modified. The ouptut was updated to display
Mu
ltiprotocol Label Switching (MPLS) traffic engineering (TE)
point-to-multipoint (P2MP) information.
Ta b l e 127 show mpls traffic-eng fast-reroute database Field Descriptions
Field Description
Prefix Address to which packets with this label are going.
Tunnel Tunnel’s identifying number.
In-label Label advertised to other routers to signify a particular prefix. The value
“
Tun hd” occurs when no such label has been advertised.