Specifications

show mpls traffic-eng fast-reroute log reroutes
MP-706
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show mpls traffic-eng fast-reroute log reroutes
To display the contents of the Fast Reroute event log, use the show mpls traffic-eng fast-reroute log
reroutes command in user EXEC mode.
show mpls traffic-eng fast-reroute log reroutes
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values.
Command Modes user EXEC
Command History
Examples The following example shows output from the sho
w mpls traffic-eng fast-reroute log reroutes
command:
Router# show mpls traffic-eng fast-reroute log reroutes
When Interface Event Rewrites Duration CPU msecs Suspends Errors
00:27:39 PO0/0 Down 1079 30 msecs 30 0 0
00:27:35 PO0/0 Up 1079 40 msecs 40 0 0
Table 130 describes significant fields shown in the display.
Release Modification
12.0(10)ST This command was introduced.
12.2(18)S This command was integrated into Cisco IOS Release 12.2(18)S.
12.2(18)SXD This command was implemented on the Catalyst 6000 series with the
SU
P720 processor.
12.2(28)SB This command was implemented on the Cisco 10000(PRE-2) router.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
Ta b l e 130 show mpls traffic-eng fast-reroute log reroutes Field Descriptions
Field Description
When Indicates how long ago the logged event occurred (before this line was displayed
o
n your screen). Displayed as hours, minutes, seconds.
Interface The physical or tunnel interface where the logged event occurred.
Event The change to Up or Down by the affected interface.
Rewrites Total number of reroutes accomplished because of this event.
Duration Time elapsed during the rerouting process, in milliseconds.
CPU msecs CPU time spent processing those reroutes, in milliseconds. (This is less than or
eq
ual to the Duration value).