Specifications

show mpls traffic-eng forwarding-adjacency
MP-708
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show mpls traffic-eng forwarding-adjacency
To display traffic engineering (TE) tunnels that are advertised as links in an Interior Gateway Protocol
(IGP) network, use the show mpls traffic-eng forwarding-adjacency command in user EXEC or
privileged EXEC mode.
show mpls traffic-eng forwarding-adjacency [i
p-address]
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
Usage Guidelines Use the s
how mpls traffic-eng forwarding-adjacency command to display information about tunnels
configured with the tunnel mpls traffic-eng forwarding-adjacency command.
Examples The following is sample output from the sho
w mpls traffic-eng forwarding-adjacency command:
Router# show mpls traffic-eng forwarding-adjacency
destination 0168.0001.0007.00 has 1 tunnels
Tunnel7 (traffic share 100000, nexthop 192.168.1.7)
(flags:Announce Forward-Adjacency, holdtime 0)
Router# show mp
ls traffic-eng forwarding-adjacency 192.168.1.7
destination 0168.0001.0007.00 has 1 tunnels
Tunnel7 (traffic share 100000, nexthop 192.168.1.7)
(flags:Announce Forward-Adjacency, holdtime 0)
ip-address (Optional) Destination address for forwarding adjacency tunnels.
Release Modification
12.0(15)S This command was introduced.
12.0(16)ST This command was integrated into Cisco IOS Release 12.0(16)ST.
12.2(18)S This command was integrated into Cisco IOS Release 2.2(18)S.
12.2(18)SXD This command was integrated into Cisco IOS Release 12.2(18)SXD.
12.2(27)SBC This command was integrated into Cisco IOS Release 12.2(27)SBC.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.4(20)T This command was integrated into Cisco IOS Release 12.4(20)T.