Specifications

show mpls traffic-eng forwarding path-set
MP-711
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
FRR OutLabel : Tunnel666, 16
LSP: Source: 10.1.0.1, TunID: 100, LSPID: 7
Destination: 10.3.0.1, P2MP Subgroup ID: 2
Path Set ID: 0x30000001
OutLabel : Serial2/0, 16
Next Hop : 10.1.3.2
FRR OutLabel : Tunnel666, 16
Table 131 describes the significant fields shown in the display.
Related Commands
Ta b l e 131 show mpls traffic-eng forwarding path-set Field Descriptions
Field Description
ID Path set ID.
Input I/F The ID assigned to the tunnel that the sub-LSPs use.
LSPID Sub-LSP ID.
InLabel MPLS label in the input interface.
PathCnt Number of paths from the headend router.
subLSPCnt Number of sub-LSPS from the headend router.
Sub-LSP Identifier
src_lspid[subid]->dst_tunid
The source and destination address of the sub-LSP being
pro
tected. The P2MP ID is appended to the source address.
The tunnel ID is appended to the destination address.
Next Hop Next-hop router.
I/F The interface that the sub-LSPs use.
PSID Path set ID.
Source IP address of the headend router.
TunID The ID assigned to the tunnel that the sub-LSPs use.
Destination IP address of the destination router.
P2MP Subgroup ID A consectutive number assigned to each sub-LSP.
Path Set ID Path set ID.
OutLabel The interface from which the label exits and the MPLS label
t
hat exits the interface.
FRR OutLabel The tunnel from which the label exits and the MPLS label
th
at exits the tunnel.
Command Description
ip path-option Species an explicit or dynamic path option for a particular destination
a
ddress in a destination list