Specifications

show mpls traffic-eng link-management advertisements
MP-716
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show mpls traffic-eng link-management advertisements
To display local link information that Multiprotocol Label Switching (MPLS) traffic engineering link
management is flooding into the global traffic engineering topology, use the show mpls traffic-eng
link-management advertisements command in user EXEC or privileged EXEC mode.
show mpls traffic-eng link-management advertisements
Syntax Description This command has no arguments or keywords.
Command Modes User EXEC (>)
Privileged EXEC (#)
Command History
Examples The following is sample output from the s
how mpls traffic-eng link-management advertisements
command:
Router# show mpls traffic-eng link-management advertisements
Flooding Status: ready
Configured Areas: 1
IGP Area[1] ID:: isis level-1
System Information::
Flooding Protocol: ISIS
Header Information::
IGP System ID: 0001.0000.0001.00
MPLS TE Router ID: 10.106.0.6
Flooded Links: 1
Link ID:: 0
Link IP Address: 10.1.0.6
IGP Neighbor: ID 0001.0000.0001.02
Admin. Weight: 10
Physical Bandwidth: 10000 kbits/sec
Max Reservable BW: 5000 kbits/sec
Downstream::
Reservable Bandwidth[0]: 5000 kbits/sec
Reservable Bandwidth[1]: 2000 kbits/sec
Reservable Bandwidth[2]: 2000 kbits/sec
Reservable Bandwidth[3]: 2000 kbits/sec
Reservable Bandwidth[4]: 2000 kbits/sec
Reservable Bandwidth[5]: 2000 kbits/sec
Release Modification
12.0(5)S This command was introduced.
12.1(3)T The command output was modified.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2(33)SXH The output was enhanced to show Internet Gateway Protocol (IGP) recovery status
p
rovided by the Cisco IOS Software Modularity: MPLS Layer 3 VPNs feature.
12.4(20)T This command was integrated into Cisco IOS Release 12.4(20)T.