Specifications

show mpls traffic-eng link-management bandwidth-allocation
MP-719
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show mpls traffic-eng link-management bandwidth-allocation
To display current local link information, use the show mpls traffic-eng link-management
bandwidth-allocation command in user EXEC or privileged EXEC mode.
show mpls traffic-eng link-management bandwidth-allocation [in
terface-name | summary
[interface-name]]
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
Usage Guidelines Advertised information might differ from the current information, depending on how flooding was
co
nfigured.
Examples
Interface Example
The following is sample output from the show mpls traffic-eng link-management
bandwidth-allocation command for a specified interface:
Router# show mpls traffic-eng link-management bandwidth-allocation Et4/0/1
System Information::
Links Count: 2
Bandwidth Hold Time: max. 15 seconds
Link ID:: Et4/0/1 (10.1.0.6)
Link Status:
Physical Bandwidth: 10000 kbits/sec
Max Reservable BW: 5000 kbits/sec (reserved:0% in, 60% out)
BW Descriptors: 1
MPLS TE Link State: MPLS TE on, RSVP on, admin-up, flooded
Inbound Admission: reject-huge
Outbound Admission: allow-if-room
interface-name (Optional) Displays only tunnels that were admitted on the specified
interface.
summary i
nterface-name (Optional) Displays bandwidth usage forthe specified interfaces.
Release Modification
12.0(5)S This command was introduced.
12.1(3)T The command output was modified.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
i
n a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.
12.2(33)SRC The summary i
nterface-name keyword-argument combination was added.