Specifications

show mpls traffic-eng link-management igp-neighbors
MP-723
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show mpls traffic-eng link-management igp-neighbors
To show Interior Gateway Protocol (IGP) neighbors, use the show mpls traffic-eng link-management
igp-neighbors command in user EXEC or privileged EXEC mode.
show mpls traffic-eng link-management igp-neighbors [ig
p-id [isis isis-address | ospf ospf-id] |
ip A.B.C.D]
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
Examples The following is sample output from the sho
w mpls traffic-eng link-management igp-neighbors
command:
Router# show mpls traffic-eng line-management igp-neighbors
Link ID:: Et0/2
Neighbor ID: 0000.0024.0004.02 (area: isis level-1, IP: 10.0.0.0)
Link ID:: PO1/0/0
Neighbor ID: 0000.0026.0001.00 (area: isis level-1, IP: 172.16.1.2)
Table 139 describes the significant fields shown in the display.
igp-id (Optional) Displays the IGP neighbors that are using a specified IGP
id
entification.
isis isi
s-address (Optional) Displays the specified IS-IS neighbor when you display
neighbors by IGP ID.
ospf ospf
-id (Optional) Displays the specified OSPF neighbor when you display
neighbors by IGP ID.
ip A.
B.C.D (Optional) Displays the IGP neighbors that are using a specified IGP IP
address.
Release Modification
12.0(5)S This command was introduced.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
i
n a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.
Ta b l e 139 show mpls traffic-eng link-management igp-neighbors Field Descriptions
Field Description
Link ID Link by which the neighbor is reached.
Neighbor ID IGP identification information for the neighbor.